From: Ivan Vecera
[ Upstream commit d0d362ffa33da4acdcf7aee2116ceef8c8fef658 ]
If port VLAN is configured on a VF then any other VLANs on top of this VF
are broken.
During i40e_ndo_set_vf_port_vlan() call the i40e driver reset the VF and
iavf driver asks PF (using VIRTCHNL_OP_GET_VF_RESOURCES) for VF capabilities
but this reset occurs too early, prior setting of vf->info.pvid field
and because this field can be zero during i40e_vc_get_vf_resources_msg()
then VIRTCHNL_VF_OFFLOAD_VLAN capability is reported to iavf driver.
This is wrong because iavf driver should not report VLAN offloading
capability when port VLAN is configured as i40e does not support QinQ
offloading.
Fix the issue by moving VF reset after setting of vf->port_vlan_id
field.
Without this patch:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ ip link set enp2s0f0 vf 0 vlan 3
$ ip link set enp2s0f0v0 up
$ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
$ ip link set vlan4 up
...
$ ethtool -k enp2s0f0v0 | grep vlan-offload
rx-vlan-offload: on
tx-vlan-offload: on
$ dmesg -l err | grep iavf
[1292500.742914] iavf 0000:02:02.0: Failed to add VLAN filter, error IAVF_ERR_INVALID_QP_ID
With this patch:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ ip link set enp2s0f0 vf 0 vlan 3
$ ip link set enp2s0f0v0 up
$ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
$ ip link set vlan4 up
...
$ ethtool -k enp2s0f0v0 | grep vlan-offload
rx-vlan-offload: off [requested on]
tx-vlan-offload: off [requested on]
$ dmesg -l err | grep iavf
Fixes: f9b4b6278d51 ("i40e: Reset the VF upon conflicting VLAN configuration")
Signed-off-by: Ivan Vecera
Reviewed-by: Jesse Brandeburg
Tested-by: Rafal Romanowski
Signed-off-by: Tony Nguyen
Signed-off-by: Sasha Levin
---
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index bb2a79b70c3a..dfaa34f2473a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -4332,9 +4332,6 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
/* duplicate request, so just return success */
goto error_pvid;
- i40e_vc_reset_vf(vf, true);
- /* During reset the VF got a new VSI, so refresh a pointer. */
- vsi = pf->vsi[vf->lan_vsi_idx];
/* Locked once because multiple functions below iterate list */
spin_lock_bh(&vsi->mac_filter_hash_lock);
@@ -4420,6 +4417,10 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
*/
vf->port_vlan_id = le16_to_cpu(vsi->info.pvid);
+ i40e_vc_reset_vf(vf, true);
+ /* During reset the VF got a new VSI, so refresh a pointer. */
+ vsi = pf->vsi[vf->lan_vsi_idx];
+
ret = i40e_config_vf_promiscuous_mode(vf, vsi->id, allmulti, alluni);
if (ret) {
dev_err(&pf->pdev->dev, "Unable to config vf promiscuous mode\n");
--
2.25.1
